Grout for ceramic garden tiles
Which one should I use when?
Grouting tiles is the solution for a beautiful and long-lasting weed-free patio. MBI has the ideal grouts for when you are going to use ceramic tiles outdoors. Available in different colours, so there is always a colour to match your ceramic tiles. Our range includes a number of grouts that are ideal for ceramic garden tiles: AquaColor Joints, Gator XP G2 Sand and Gator Tile Sand. The properties of our range of grouts are set out below, along with when each grout should be used.
More information about MBI jointing compounds
AquaColor Joints jointing compound
Instead of MBI Weed-Free Jointing Sand, opt for a hard joint. MBI has included the high-quality AquaColor Joints in its range especially for this purpose. These joints are hard, do not wash out and are particularly weed-resistant. The joints remain slightly flexible so that they do not crack easily. This jointing compound is recommended for all types of tiles, but especially for ceramic, GeoCeramica® and GeoProArte®. Available in six different colours, such as neutral (sand colour), stone grey, basalt, light grey, dark grey and black. Please note: for best results, use AquaColor Joints on a well-stabilised surface.
AquaColor Joints 2Drive
AquaColor Joints 2Drive joint mortar based on epoxy resin is suitable for traffic loads with vehicles up to 3.5 tonnes. The joint mortar is slightly water-permeable and suitable for all GeoCeramica® designs in 6 and 8 cm thicknesses, GeoProArte®, StoneLine joint stones and other paving with a joint width of >5 mm. Please note: for best results, use AquaColor Joints (2Drive) on a well-stabilised substrate. Due to its low water permeability, this joint mortar should be applied to a draining substrate. It is applied wet and is self-compacting.
Gator XP G2 Jointing Sand
A semi-hard jointing compound based on polymers. Jointing is easy: sweep onto dry paving, compact, water and you're done! This jointing compound can be used for joints as small as 2 mm and is widely used for baked clinkers, but is suitable for almost all types of tiles, including ceramic tiles. Due to its water-permeable properties, this jointing compound is best used when the ceramic tiles are laid on a drainage mortar (stabilised substrate).
Gator Nitro and Nitro-X
This jointing material is air-curing and water-permeable. It is a ready-to-use mixture of calibrated sand and a patented resin formula that cures on exposure to air and cures from top to bottom in the joint. The product can be applied in wet or dry weather above 3°C. For use with >3 cm ceramic tiles, concrete blocks and natural stone. If the substrate has poor drainage, Gator Nitro-X can be used. This fine jointing sand is also ideal for terraces, pool decks, walkways and driveways.
Contact us
MBI offers a very wide choice for the design of indoor and outdoor spaces. Leave your details and we will contact you a.s.a.p..
.jpeg?1768921371)