Ceramic levelling system

Lay perfect ceramic floor and wall tiles without any unevenness!

An ideal tool for DIY enthusiasts: our new ceramic levelling system. Prevent unevenness and make your patio super smooth. The components are designed to eliminate irregularities. Especially for rectified and large-format ceramic tiles up to 2 cm thick. Grouting ceramic garden tiles with a 3 mm joint is very easy with this levelling system.

The levelling system should be used where the tiles are laid in adhesive mortar with a water-tight substrate. See the step-by-step guide below.

Place the clip under the ceramic tile.

Place the other ceramic tile against it.

Secure the wedge under the clip.

Squeeze the ceramic tiles under the wedge, using the pliers to keep them flat.

Repeat this process and, once the entire floor has been levelled, allow the mortar/adhesive to dry in accordance with the instructions for use.

Once everything is dry, carefully kick the side of the clip so that it breaks off.

Place the clip under the ceramic tile.
Place the other ceramic tile against it.
Secure the wedge under the clip.
Squeeze the ceramic tiles under the wedge, using the pliers to keep them flat.
Repeat this process and when the entire floor is level, allow the mortar/adhesive to dry in accordance with the instructions for use.
Once everything has dried, carefully kick the side of the clip so that it breaks off.
Grout ceramic garden tiles with AquaColor Joints or Gator Nitro-X.